JOBS-ADDA: Andhra Pradesh Job Openings

Showing posts with label Andhra Pradesh Job Openings. Show all posts

Wednesday, January 11, 2012

APPSC, ASSISTANT EXECUTIVE ENGINEERS JOB OPENINGS FOR 2012

3:05 PM

No comments

Read more »

Tuesday, January 10, 2012

APPSC, ASSISTANT EXECUTIVE ENGINEERS JOB OPENINGS FOR 2012

6:22 PM

No comments

Read more »

APPSC, ASSISTANT DIRECTOR JOB OPENINGS FOR 2012

6:16 PM

No comments

Eligibility: BE/B.Tech(Architecture Engineering, Civil Engineering)
MA(Geography)
Diploma
Location: Andhra Pradesh-other
Job Category: Core Technical, Govt Sector, Others
Last Date: 4 June 12

Selection Process: Written-test.

Job Details

Notification No.35/2011 Dated: 28/12/2011

Andhra Pradesh Public Service Commission, invites Online applications for the post of Assistant Director in A.P. Town and Country Planning Service

Post Code	Post Name	Qualification	No. of Post / Age as on 01/07/2011
01	Assistant Director in A.P. Town and Country Planning Service	Must posses B.Arch. or B.E. (Civil) or M.A.(Geography) and a Post Graduate Degree or Diploma in Town and Country Planning from a University in India established or incorporated by or under a Central Act, State Act or Provincial Act, or Institution or Fellowship or Associate ship of the Institute of Town Planners of India or equivalent membership of a professional institute of planners recognized by the University Grants Commission.	31 posts 18-34 Years

Scale of Pay : Rs. 10,845-25,600/-

Written Examination Centre & Date : The Written Examination will be held on 22/07/2012 at Hyderabad only.

Procedure of Selection: The Selection of Candidates for appointment to the posts will be made by Written Examination (Objective Type) For Eligible Candidates. The final selection of these posts will be based on the Written Examination.

Fee : Each applicant must pay Rs.100/- (Rupees One Hundred Only) towards Application Processing Fee and Examination Fee Rs.120/- (if Candidates are not exempted from payment of Fee). Payment of Rs.100/- (Rupees One Hundred Only) towards application processing fee is compulsory for all Applicants. Mode of Payment of Fee : Step I :-The Candidate has to logon to the AP PSC website and enter his/her Basic Personal Details like Name, Father’s Name, Date of Birth, and Community. II Step:-Immediately on entering the above details the Applicant will get (downloadable)- Challan Form to pay the Fee at AP Online centers /State Bank of India. III Step:-The Applicant should pay the prescribed Fee in any one of the A.P. Online centers / State Bank of India and obtain Fee paid challan with Journal Number in the first instance. IV Step:-On the next working day after payment of Fee the Applicant should again visit AP PSC website and enter the Journal Number to get the format of Application. The applicant has to invariably fill all the columns in the Application and should submit ON-Line. Even after making payment of fee, candidate fails to submit the bio-data particulars, such applications shall be rejected without giving any notice. V Step:- If any candidate fails to enter “Community” for any reason, they will be treated as an OC without giving any notice.

APPLYING PROCEDURE

Candidate Apply Online between 04/05/2012 to 04/06/2012 (Note: 02/06/2012 is the last date for payment of fees)
Click Here For Details

Apply Online

Read more »

APSRTC,Traffic Supervisor Trainee/ Mechanical Supervisor Trainee job openings - 2012

6:10 PM

No comments

Eligibility: BE/B.Tech(Automobile Engineering, Mechanical Engineering)
Diploma(Automobile, Mechanical Engineering)
Location: Andhra Pradesh-other
Job Category: Core Technical, Govt Sector, Others
Last Date: 6 February 12

Selection Process: Written-test.

Job Details

No.R2/684(28)/2011-HRD Dt:26.12.2011
Andhra Pradesh State Road Transport Corporation (APSRTC), invites Online application for the post of Traffic Supervisor Trainee/Mechanical

Supervisor Trainee.

Category	Qualification	No. of Post	Age as on 01.07.2011
Traffic Supervisor Trainee (TST)	Graduate from a Recognized University.	104	18 -25 yrs
Mechanical Supervisor Trainee (MST)	Diploma in Automobile/Mechanical Engineering conducted by the Department of Technical Education, Government of A.P. or its equivalent qualification in the same discipline. Candidates possessing higher qualification of BE/B.Tech/AMIE in the discipline of Automobile/ Mechanical Engineering are also eligible.	138	18 -25 yrs

Method of Selection : Based on objective type written test & Interview.

Period of Training : One year on a stipend of Rs.9280/- per month.

Pay Scale : Upon successful completion of trainig the selected candidtes will be appointed as Dy.Superintendent (Traffic)/Dy.Superintendent (Mechanical) in the time Scale Rs.9280-290-12760-320-15320-340-19400-365-23780 plus usual allowances as admissible and will be placed on prabation.

Fee :

Community	Fee to be paid if applying for one post only ie either TST or MST	Fee to be paid if applying for both TST and MST
OC	Rs.400/-	Rs.600/-
SC/ST/Ex.Ser/ Departmental candidates	Rs.200/-	Rs.200/-

Note : Candidates belonging to States other than Andhra Pradesh will be considered in general category only and are required to pay the above prescribed fee. Mode of payment : The Applicant should pay the prescribed fee in any one of the A.P. Online centres and obatain Fee paid receipt with Journal Number (12 digit) in the first instance. Specific Journal number is provided to each individual applicant by the A.P. Online Centres.

How to apply

Candidate may apply Online from 18.01.2012.

Important Dates
Starting date for payment of Fee at AP Online Centre	18.01.2012
Starting date for filling Online application	19.01.2012
Last date for payment of Fee at AP Online	04.02.2012 up to 5.00 P.M
Last date for uploading of Application	06.02.2012 up to 5.00 P.M

Click Here For Details & Apply Online

Read more »

Thursday, December 29, 2011

APPSC Group 2 Notification 2011

6:36 PM

No comments

హైదరాబాద్: ఉద్యోగాల భర్తీకి ఆంధ్రప్రదేశ్ పబ్లిక్ సర్వీస్ కమిషన్ మరో నోటిఫికేషన్ జారీ చేసింది. గురువారం మధ్నాహ్నం గ్రూప్-2తోపాటు వివిధ పోస్టుల భర్తీకి నోటిఫికేషన్ జారీ చేసింది. 2739 పోస్టులకు 10 నోటిఫికేషన్లు జారీ అయ్యాయి. ఏపీపీఎస్‌స్సీ జారీ చేసిన నోటిఫికేషన్‌లో డిగ్రి కళాశాల లెక్చరర్లు 656, సివిల్ అసిస్టెంట్ సర్జన్ పోస్టులు 319, ఎగ్జిక్యూటివ్ 119, నాన్ ఎగ్జిక్యూటివ్ 404 పోస్టులు ఉన్నాయి.

డిగ్రీ కళాశాల లెక్చరర్ల ఉద్యోగాల భర్తీకి మే 6 వ తేదిన, ఆర్‌డబ్ల్యూఎస్‌ఏఈఈ పోస్టుల కోసం జూలై 1 తేదిన, గ్రూప్-2 పరీక్షను జూలై 15 తేదిన నిర్వహిస్తామన్నారు. ఇదిలా ఉండగా వీఆర్‌ఓ, వీఆర్‌ఏ పోస్టులకు 10 లక్షలకు పైగా దరఖాస్తులు వచ్చాయని అధికారులు వెల్లడించారు. వీఆర్‌ఓ 9 లక్షలుకు పైగా, వీఆర్‌ఏ 1 పైగా దరఖాస్తులు వచ్చాయన్నారు.

Read more »

Andhra Pradesh Public Service Commision Group 2 Notification

6:34 PM

No comments

Read more »

APPSC Group - 2 Notification Released

6:33 PM

No comments

APPSC Group - 2 Notification:

ఏపీపీఎస్సీ మరో నోటిఫికేషన్ జారీ

Read more »

Bharat Dynamics Ltd, Management Trainees/Junior Managers job openings - 2011

1:52 PM

No comments

Date of posting:29 December

Eligibility: BA
BE/B.Tech(Computer Science Engineering, Electrical & Electronics Engineering, Electronics & Communication Engineering, Mechanical Engineering, Electrical Engineering, Electronics & Information technology)
BSc
CA
ICWA
MBA/PGDM

Location: Andhra Pradesh-other

Job Category: Core Technical, Govt Sector, Others

Last Date: 17 January 12

Selection Process: Written-test.

Job Details

Bharat Dynamics Limited, invites application from eligible Indian Nationals for the post of Management Trainees/Junior Managers

Sl. No.	Post Name	Qualification	No. of Post	Scale of Pay/ Age as on 01.01.2012
4.	Management Trainee (Finance) Grade -II	Pass in CA/ICWAI (OR) First Class Graduates in Arts/ Science/Commerce (2nd Class in case of SC/ST candidates) with MBA with specialization in Finance discipline with 60% marks for UR/OBC and 55% marks for SC/ST candidates in aggregate from recognized University / Institution (Two years regular course).	4	Rs.16400- 40500/- 25 Yrs
5.	Management Trainee (P&A) Grade -II	First Class Graduates in Arts/ Science/Commerce (2nd Class in case of SC/ST candidates) with Post Graduate Degree / Diploma in Personnel Management / Social Welfare / Social Science/ Industrial Relations with 60% marks for UR/OBC and 55% marks for SC/ST candidates in aggregate from a recognized University/ Institution (Two years regular course) (OR) MBA from Indian Institute of Management (OR) MBA from any University recognized by the Government with specialization in Personnel Management / Industrial Relations with 60% marks for UR/OBC and 55% marks for SC/ST candidates in aggregate (Two years regular course)	14	Rs.16400- 40500/- 25 Yrs
6.	Junior Manager (Mechanical /Electronics/ Electrical/ Computers Grade -I	Degree in Engineering or Technology or equivalent degree in Mechanical/ Electronics / Electrical /Computers with 60% marks for UR/OBC and 55% marks for SC/ST candidates in aggregate from recognized University or Institution as regular course.	16	Rs.12600- 32500/- 28 Yrs

Selection Procedure : Written Test & Interview.

Application Fee : Rs.400/- for GEN OBC Candidates which is non-refundable, is to be sent in the form of crossed Demand Draft drawn on any Nationalized Bank in favour of “Bharat Dynamics Limited” payable at Hyderabad (OR) through Online Payment (Taxes Applicable) . Payment can also be made through Net Banking facility of Axis Bank only. Applicants should send DD (in case of DD) along with Registration Slip & Bio-Data form. Applicants belonging to SC/ST/Persons with Disability and BDL employees are exempted from payment of application fee.

APPLYING PROCEDURE

Applications should be submitted Online only. Online application open from 27-12-2011 and closes on 17-01-2012 at 1600 hrs. Candidates are allowed to apply only once and applications once submitted cannot be altered under any circumstances. It is mandatory to write his/her Name and the registration number allotted, on the reverse side of the Demand Draft and SC/ST/PWD on the reverse side of the certificates, which is to be forwarded along with registration slip and duly filled in Bio-Data (as per proforma at Annexure - I), relevant documents to “AGM, C-P&A (Plg & ED), Bharat Dynamics Limited, Kanchanbagh, Hyderabad – 500 058” by post so as to reach latest by 23-01-2012. The envelope should be superscribed with “Application for the post being applied in bold letters”.

Click Here For Details

To Download Bio-data Form

Apply Online

Read more »

Tuesday, December 27, 2011

APPSC AEE Electrical & Civil Syllabus

11:18 PM

No comments

SYLLABUS FOR THE POST OF ASSISTANT EXECUTIVE ENGINEERS

C.No: 283/SS/06
SCHEME AND SYLLABUS FOR THE POST OF ASSISTANT EXECUTIVE ENGINEERS IN
ROADS & BUILDINGS SERVICE

SCHEME
PART-A WRITTEN (OBJECTIVE TYPE) EXAMINATION
PAPER-1 General Studies & Mental Ability 150 Marks 150 Qns 150 Minutes
PAPER-2 Concerned Subject: Civil OR Electrical Engineering - 300 Marks 150 Qns 150 Minutes
PART-B: INTERVIEW 50 Marks

SYLLABUS
GENERAL STUDIES & MENTAL ABILITY
1. SCIENCE AND TECHNOLOGY:
a) General Science and Technology
b) Role and impact of science and Technology on India’s development.
(Questions will cover general appreciation and understanding of matters of everyday
observation and experience as may be expected of a well-educated person who has not
made a special study of science and technology disciplines).
2. INDIAN HISTORY AND CULTURE:
a) Modern Indian History from 19th century to the present
b) Nationalist Movement and Constitutional development
c) Indian culture and Heritage including architecture, Fine Arts, dance forms, music,
paintings, Folk arts and performing arts.
d) History of Andhradesa Society, Culture, Geography and Economic development.
3. INDIAN POLITY:
General and broad understanding of the structural (institutions) and functional (processes)
aspects of Indian Political system.
4. INDIAN ECONOMY AND GEOGRAPHY OF INDIA:
(a) Structure of National economy
(b) Economic development (including planning) since independence
(c) Economic Reforms
(d) Physical, economic and social Geography of India.
5. CURRENT EVENTS:
Current Events of Regional, National and International importance.
6. GENERAL MENTAL ABILITY: (Reasoning and analytical abilities)
2
CONCERNED SUBJECT (CIVIL ENGINEERING)
STRENGTH OF MATERIALS:-
Simple stresses and Strains: Types of stresses and strains - Hook's Law, Stress-strain curve
for mild steel working stress and factor of safety Posion ratio - State of simple shear, complementary
- Shear Elastic constants and their relations - Compound bars - Thermal stress.
Compound stresses Mohr’s circle of stress - Principal stresses and planes.
Shear force and bending moment diagrams: S.F.D. and B.M.D. for cantilevers, simply
supported beams and over hanging beams subjected to point leads and uniformly distributed loads.
Relations among load, shear force and bending moment.
Bending and shear stress: Basic equation; M/I = F/Y = E/R - Distribution of bending and
shear stresses across various cross sections such as rectangular, circular, I and T sections, Torsion
of Circular shafts - power transmission.
Columns and struts: Euler's theory and Rankine's Theory - Socant and Perry formulae for
eccentrically loaded columns.
Deflections and slopes: Slopes and deflections in cantilevers simply supported beams;
propped beams and fixed beams subjected to point leads and uniformly distributed loads.
FLUID MECHANICS AND HYDRAULIC MACHINERY:
Fluid statics: Hydrostatic force on a plane and curved area Centre of pressure and its
applications to lockgates and dams Metacentric height.
Fluid Dynamics: Convective and local acceleration, Euler's equation of motion and its
intergration, Bernoulli's equation motion and its application, flow in curved path. Free and forced
vortex.
Flow measurements: Notches and weirs, venturimeters, pitot tube, nozzle meter, current
meter.
Compressible Flow: Velocity of pressure wave, wave velocity for adiabatic and isothermal
compression, Basic equations of one-dimensional flow continuity, energy and momentum
equations.
Laminar and turbulant flow through pipes: Reynolds experiment significance of
Reynold's number, formulae for laminar flow through circular pipes, Turbulant flow-Darcy Weisbsch
equation, friction factor and Mody's diagram.
Turbines: Classification, specific speed velocity triangles Principles of design of reaction and
impules Turbines, characteristic curves.
Pumps: Centrifugal pumps, velocity triangles, Work done and efficiency minimum starting
speed, loss of head; specific speed and characteristic curves for centrifugal pumps.
BUILDING MATERIALS:
Timber: Different types and species of structural timber, density – moisture relationship, strength in
different directions, defects, preservations, plywood.
Bricks: Types, Indian standard classification, absorption, saturation factor, strength in masonry,
influence of mortar strength on masonry strength.
Cement: Compounds of different types, setting times, strength.
Cement mortar: Ingredients, proportions, water demand, mortars for plastering and masonry.
Concrete: Importance of w/c ratio, strength, ingredients including admixtures, workability, testing for
strength, mix design methods, non-destructive testing.
STRUCTURAL ANALYSIS:
Analysis of determinate structures – different methods. Analysis of indeterminate skeletal frames –
Moment distribution, Slope deflection, Kani’s, Stiffness and force methods, Energy methods, Muller
Breslan principle and application. Plastic analysis of indeterminate beams and simple portal frames
– Shape factors.
3
DESIGN OF STEEL STRUCTURES:
Principles of working stress method. Design of connections, Simple members, Built-up sections and
Frames, Design of industrial roofs. Principles of ultimate load design. Design of simple members.
DESIGN OF CONCRETE AND MASONRY STRUCTURES:
Limit state design for bending, Shear, Axial compression and combined forces. Codal provision for
slabs, Beams, Columns and footings. Working stress method of design of R.C. members. Principles
of pre-stressed concrete design, Materials, Methods of pre-stressing, losses. Design of simple
members and determinate structures. Design of brick masonry as per IS codes.
CONSTRUCTION PLANNING AND MANAGEMENT:
Bar chart, Linked bar chart, Work break down structures, Activity – on – arrow diagrams. Critical
path, Probabilistic activity durations, Event based networks. PERT network: Time-cost study,
Crashing, Resource allocation.
HYDROLOGY AND WATER RESOURCE ENGINEERING:
Hydrological cycle, Precipitation and related data analysis, Unit hydrographs, Evaporation and
transpiration. Floods and their management, Stream gauging, Routing of floods, Capacity of
reservoirs. Multi purpose uses of water: Soil-plant – Water relationships, Irrigation systems. Water
demand assessment: Storages and their yields. Ground water yield and well Hydraulics. Water
logging and drainage design. Design of rigid boundary canals, Lacey’s and tractive force concepts in
canal design, Lining of Canals, Sediment transport in canals, Non-overflow and overflow dams and
their design, Energy dissipators, Design of head works, Distribution works, Falls, Cross-drainage
works, Outlets, River training.
ENVIRONMENTAL ENGINEERING:
a. Water Supplying Engineering: Sources of supply, Yields, Design of intakes and conductors,
Estimation of demand. Water quality standards, Control of water borne diseases. Primary
and secondary treatment. Conveyance and distribution systems of treated water, Leakages
and control. Rural water supply. Institutional and industrial water supply.
b. Waste Water engineering: Urban rain water disposal, Systems of sewage collection and
disposal. Design of sewers and sewerage systems, Pumping. Characteristics of sewage and
its treatment. Disposal of products of sewage treatment. Plumbing systems. Rural and
semi-urban sanitation.
c. Solid Waste Management: Sources and effects of air pollution, Monitoring of air pollution,
Noise pollution, Standards, Ecological chain and balance. Environmental assessment.
SOIL MECHANICS AND FOUNDATION ENGINEERING:
Properties and classification of soil, Compaction, Permeability and Seepage, Flow nets, Inverted
filters, Compressibility and consolidation. Shearing resistance, Stresses and failure. Soil testing in
laboratories and in-situ, Earth pressure theories, Stress distribution in soils, Soil exploration,
Samplers, Load tests, Penetration tests. Types of foundations, Selection criteria, Bearing capacity,
Settlement, Laboratory and field tests, Types of piles and their design and layout. Foundations on
expansive soils, Swelling and its prevention, Foundation on swelling soils.
SURVEYING AND TRANSPORT ENGINEERING:
Classification of surveys, Scales, Accuracy, Measurement of distances, Direct and indirect methods,
Optical and electronic devices, Measurement of directions, Prismatic compass, Local attraction,
Theodlytes, Types, Measurement of elevations, Spirit and trigonometric leveling, Contours, Digital
elevation modeling concept, Establishment of control by triangulations and traversing, Measurement
and adjustment of observations, Computation of coordinates, Field astronomy, Concept of global
positioning system, Map preparation by plane tabling and by photogrammetry, Remote sensing
concepts, Map substitutes. Planning of Highway systems, Alignment and geometric design,
Horizontal and vertical curves, Grade separation, Materials and construction methods for different
surfaces and maintenance. Principles of pavement design, Drainage. Traffic surveys, Intersections,
Signaling, Mass transit systems, Accessibility, Networking.
4
CONCERNED SUBJECT (ELECTRICAL ENGINEERING)
ELECTRICAL CIRCUITS:
Basic electrical laws, Analysis of DC networks, transient response of RLC networks excited
by impulse, step, ramp and sinusoidal excitations. Transform methods, transfer functions, poles and
zeros steady state AC networks, frequency domain analysis, resonance, coupled circuits, two port
networks, three phase networks, power in a.c. networks, power measurement in 3-phase networks.
E.M. THEORY:
Electro static and electro magnetic fields, vector methods, Fields in dielectric, conducting and
magnetic materials, Laplace and Poisson’s equation. Time varying fields, Maxwell’s equation,
Poynting Theory, properties of transmission lines.
ELECTRICAL MEASUREMENT AND INSTRUMENTS:
Electrical standards, Error analysis, Measurement of current, voltage, power, energy, power
factor, resistance, inductance capacitance frequency and loss angle. Indicating instruments,
extension of range of instruments, DC and AC bridges. Electronic measuring instruments. Electronic
multimeter, CRO, frequency counter, digital voltmeter, transducers, Thermocouples, Thermistor,
LVDT, strain gauges, Piezo electric crystal, Measurement of non-electrical quantities like, pressure,
velocity, temperature, flow rate, displacement acceleration and strain.
CONTROL SYSTEMS
Open and closed loop control systems, Mathematical modeling, block diagram, signal flow
graphs, time response and frequency response of linerar systems, error constants and series
Rootlocus technique, Bodeplot, polar plot, M-circles, N-circles, Nichol’s charts, stability, Routh
Hurwitz criteria. Nyquist stability criteria, compensators, design in frequency domain. Control system
components. Servo motors, synchros, tacho generator, error detector. State variable approach,
modeling, state transition matrix, transfer function, response.
ELECTRONICS:
Solid state devices and circuits. Small and large signal-amplifiers with and without feedback
at audio and radio frequency, multistage amplifiers. Operational amplifiers and applications.
Integrated circuits oscillators, RC, LC and crystal oscillators wave form generators, multi-vibrators –
Digital circuits, Logic gates, Boolean algebra combinational and sequential circuits. A to D and D to
A converters Micro processors (8085) instruction set, memories, interfacing programmable peripheral
devices – Number system flow charts – expressions and statements in C – language – simple
programs for engineering application.
D.C. ELECTRICAL MACHINES:
Fundamentals of electro mechanical energy conversion, constructional features of D.C.
Machines, emf equation types and characteristics of generators application, Torque in DC motor,
types of DC motors, applications. Testing of D.C. motors, efficiency, and starting and speed control.
TRANSFORMERS:
Construction – Principle of operation of 1-phase transformers – Vector diagram on No Load
and – Load – Parallel operation – Regulation – efficiency – Equivalent circuit 3 phase transformer
connections – Scott connection.
INDUCTION MOTORS:
Production of rotating magnetic field, production of torque types of motors equivalent circuits,
Circle diagram, torque slip characteristics, starting and maximum torque, speed control, principle of
single phase induction motors, Applications.
SYNCHRONOUS MACHINES:
Generation of emf in 3 phase AC Generator, Armature reaction, regulation by Synchronous
inpedance and Ampere turn methods, parallel operation, transient and sub-transiat reactances,
theory of salient pole machines.
Synchronous Motor: Torque production, performance characteristics, methods of starting, VCurves,
synchronous condenser.
Special Machines: Stepper motor, Methods of operation, Amplidyne and metadyneapplications.
5
ELECTRICAL POWER GENERATION:
General layout – Types of power stations, economics of different types, base load and peak
load stations, load factor and its effects, pumped storage schemes.
POWER TRANSMISSION:
Calculation of line parameters, concepts of short, medium and long transmission lines, ABCD
parameters, insulators, Corona, P.U. quantities, fault calculations, symmetrical components load flow
analysis using Gauss Seidal, New-ton Raphson, methods, economic operation, stability, steady state
and transient stability, equal area criterion, ALFC and AVR control for real time operation of
interconnected systems.
POWER SYSTEM PROTECTION:
Principles of arc quenching, circuit breaker classification, Recovery and restriking voltages,
relaying principles over current, directional over current relays-generator and transformer protection
using differential relays-line protection using distance relays Surgeo phenomena in transmission lines
– Travelling wave theory, protection against surges.
UTILISATION :
Industrial Drives – Motors for various drives – Braking methods – Speed control of motors –
Economics of rail traction – Mechanics of train movement – Estimation of power and energy
requirements – Illumination – Laws Factory lighting – Street lighting – Induction and dielectric
heating.

Read more »

SYLLABUS FOR THE POST OF ASSISTANT EXECUTIVE ENGINEERS

11:16 PM

No comments

C.No: 283/SS/06
SCHEME AND SYLLABUS FOR THE POST OF ASSISTANT EXECUTIVE ENGINEERS IN
ROADS & BUILDINGS SERVICE

SCHEME
PART-A WRITTEN (OBJECTIVE TYPE) EXAMINATION
PAPER-1 General Studies & Mental Ability 150 Marks 150 Qns 150 Minutes
PAPER-2 Concerned Subject: Civil OR Electrical Engineering - 300 Marks 150 Qns 150 Minutes
PART-B: INTERVIEW 50 Marks

SYLLABUS
GENERAL STUDIES & MENTAL ABILITY
1. SCIENCE AND TECHNOLOGY:
a) General Science and Technology
b) Role and impact of science and Technology on India’s development.
(Questions will cover general appreciation and understanding of matters of everyday
observation and experience as may be expected of a well-educated person who has not
made a special study of science and technology disciplines).
2. INDIAN HISTORY AND CULTURE:
a) Modern Indian History from 19th century to the present
b) Nationalist Movement and Constitutional development
c) Indian culture and Heritage including architecture, Fine Arts, dance forms, music,
paintings, Folk arts and performing arts.
d) History of Andhradesa Society, Culture, Geography and Economic development.
3. INDIAN POLITY:
General and broad understanding of the structural (institutions) and functional (processes)
aspects of Indian Political system.
4. INDIAN ECONOMY AND GEOGRAPHY OF INDIA:
(a) Structure of National economy
(b) Economic development (including planning) since independence
(c) Economic Reforms
(d) Physical, economic and social Geography of India.
5. CURRENT EVENTS:
Current Events of Regional, National and International importance.
6. GENERAL MENTAL ABILITY: (Reasoning and analytical abilities)
2
CONCERNED SUBJECT (CIVIL ENGINEERING)
STRENGTH OF MATERIALS:-
Simple stresses and Strains: Types of stresses and strains - Hook's Law, Stress-strain curve
for mild steel working stress and factor of safety Posion ratio - State of simple shear, complementary
- Shear Elastic constants and their relations - Compound bars - Thermal stress.
Compound stresses Mohr’s circle of stress - Principal stresses and planes.
Shear force and bending moment diagrams: S.F.D. and B.M.D. for cantilevers, simply
supported beams and over hanging beams subjected to point leads and uniformly distributed loads.
Relations among load, shear force and bending moment.
Bending and shear stress: Basic equation; M/I = F/Y = E/R - Distribution of bending and
shear stresses across various cross sections such as rectangular, circular, I and T sections, Torsion
of Circular shafts - power transmission.
Columns and struts: Euler's theory and Rankine's Theory - Socant and Perry formulae for
eccentrically loaded columns.
Deflections and slopes: Slopes and deflections in cantilevers simply supported beams;
propped beams and fixed beams subjected to point leads and uniformly distributed loads.
FLUID MECHANICS AND HYDRAULIC MACHINERY:
Fluid statics: Hydrostatic force on a plane and curved area Centre of pressure and its
applications to lockgates and dams Metacentric height.
Fluid Dynamics: Convective and local acceleration, Euler's equation of motion and its
intergration, Bernoulli's equation motion and its application, flow in curved path. Free and forced
vortex.
Flow measurements: Notches and weirs, venturimeters, pitot tube, nozzle meter, current
meter.
Compressible Flow: Velocity of pressure wave, wave velocity for adiabatic and isothermal
compression, Basic equations of one-dimensional flow continuity, energy and momentum
equations.
Laminar and turbulant flow through pipes: Reynolds experiment significance of
Reynold's number, formulae for laminar flow through circular pipes, Turbulant flow-Darcy Weisbsch
equation, friction factor and Mody's diagram.
Turbines: Classification, specific speed velocity triangles Principles of design of reaction and
impules Turbines, characteristic curves.
Pumps: Centrifugal pumps, velocity triangles, Work done and efficiency minimum starting
speed, loss of head; specific speed and characteristic curves for centrifugal pumps.
BUILDING MATERIALS:
Timber: Different types and species of structural timber, density – moisture relationship, strength in
different directions, defects, preservations, plywood.
Bricks: Types, Indian standard classification, absorption, saturation factor, strength in masonry,
influence of mortar strength on masonry strength.
Cement: Compounds of different types, setting times, strength.
Cement mortar: Ingredients, proportions, water demand, mortars for plastering and masonry.
Concrete: Importance of w/c ratio, strength, ingredients including admixtures, workability, testing for
strength, mix design methods, non-destructive testing.
STRUCTURAL ANALYSIS:
Analysis of determinate structures – different methods. Analysis of indeterminate skeletal frames –
Moment distribution, Slope deflection, Kani’s, Stiffness and force methods, Energy methods, Muller
Breslan principle and application. Plastic analysis of indeterminate beams and simple portal frames
– Shape factors.
3
DESIGN OF STEEL STRUCTURES:
Principles of working stress method. Design of connections, Simple members, Built-up sections and
Frames, Design of industrial roofs. Principles of ultimate load design. Design of simple members.
DESIGN OF CONCRETE AND MASONRY STRUCTURES:
Limit state design for bending, Shear, Axial compression and combined forces. Codal provision for
slabs, Beams, Columns and footings. Working stress method of design of R.C. members. Principles
of pre-stressed concrete design, Materials, Methods of pre-stressing, losses. Design of simple
members and determinate structures. Design of brick masonry as per IS codes.
CONSTRUCTION PLANNING AND MANAGEMENT:
Bar chart, Linked bar chart, Work break down structures, Activity – on – arrow diagrams. Critical
path, Probabilistic activity durations, Event based networks. PERT network: Time-cost study,
Crashing, Resource allocation.
HYDROLOGY AND WATER RESOURCE ENGINEERING:
Hydrological cycle, Precipitation and related data analysis, Unit hydrographs, Evaporation and
transpiration. Floods and their management, Stream gauging, Routing of floods, Capacity of
reservoirs. Multi purpose uses of water: Soil-plant – Water relationships, Irrigation systems. Water
demand assessment: Storages and their yields. Ground water yield and well Hydraulics. Water
logging and drainage design. Design of rigid boundary canals, Lacey’s and tractive force concepts in
canal design, Lining of Canals, Sediment transport in canals, Non-overflow and overflow dams and
their design, Energy dissipators, Design of head works, Distribution works, Falls, Cross-drainage
works, Outlets, River training.
ENVIRONMENTAL ENGINEERING:
a. Water Supplying Engineering: Sources of supply, Yields, Design of intakes and conductors,
Estimation of demand. Water quality standards, Control of water borne diseases. Primary
and secondary treatment. Conveyance and distribution systems of treated water, Leakages
and control. Rural water supply. Institutional and industrial water supply.
b. Waste Water engineering: Urban rain water disposal, Systems of sewage collection and
disposal. Design of sewers and sewerage systems, Pumping. Characteristics of sewage and
its treatment. Disposal of products of sewage treatment. Plumbing systems. Rural and
semi-urban sanitation.
c. Solid Waste Management: Sources and effects of air pollution, Monitoring of air pollution,
Noise pollution, Standards, Ecological chain and balance. Environmental assessment.
SOIL MECHANICS AND FOUNDATION ENGINEERING:
Properties and classification of soil, Compaction, Permeability and Seepage, Flow nets, Inverted
filters, Compressibility and consolidation. Shearing resistance, Stresses and failure. Soil testing in
laboratories and in-situ, Earth pressure theories, Stress distribution in soils, Soil exploration,
Samplers, Load tests, Penetration tests. Types of foundations, Selection criteria, Bearing capacity,
Settlement, Laboratory and field tests, Types of piles and their design and layout. Foundations on
expansive soils, Swelling and its prevention, Foundation on swelling soils.
SURVEYING AND TRANSPORT ENGINEERING:
Classification of surveys, Scales, Accuracy, Measurement of distances, Direct and indirect methods,
Optical and electronic devices, Measurement of directions, Prismatic compass, Local attraction,
Theodlytes, Types, Measurement of elevations, Spirit and trigonometric leveling, Contours, Digital
elevation modeling concept, Establishment of control by triangulations and traversing, Measurement
and adjustment of observations, Computation of coordinates, Field astronomy, Concept of global
positioning system, Map preparation by plane tabling and by photogrammetry, Remote sensing
concepts, Map substitutes. Planning of Highway systems, Alignment and geometric design,
Horizontal and vertical curves, Grade separation, Materials and construction methods for different
surfaces and maintenance. Principles of pavement design, Drainage. Traffic surveys, Intersections,
Signaling, Mass transit systems, Accessibility, Networking.
4
CONCERNED SUBJECT (ELECTRICAL ENGINEERING)
ELECTRICAL CIRCUITS:
Basic electrical laws, Analysis of DC networks, transient response of RLC networks excited
by impulse, step, ramp and sinusoidal excitations. Transform methods, transfer functions, poles and
zeros steady state AC networks, frequency domain analysis, resonance, coupled circuits, two port
networks, three phase networks, power in a.c. networks, power measurement in 3-phase networks.
E.M. THEORY:
Electro static and electro magnetic fields, vector methods, Fields in dielectric, conducting and
magnetic materials, Laplace and Poisson’s equation. Time varying fields, Maxwell’s equation,
Poynting Theory, properties of transmission lines.
ELECTRICAL MEASUREMENT AND INSTRUMENTS:
Electrical standards, Error analysis, Measurement of current, voltage, power, energy, power
factor, resistance, inductance capacitance frequency and loss angle. Indicating instruments,
extension of range of instruments, DC and AC bridges. Electronic measuring instruments. Electronic
multimeter, CRO, frequency counter, digital voltmeter, transducers, Thermocouples, Thermistor,
LVDT, strain gauges, Piezo electric crystal, Measurement of non-electrical quantities like, pressure,
velocity, temperature, flow rate, displacement acceleration and strain.
CONTROL SYSTEMS
Open and closed loop control systems, Mathematical modeling, block diagram, signal flow
graphs, time response and frequency response of linerar systems, error constants and series
Rootlocus technique, Bodeplot, polar plot, M-circles, N-circles, Nichol’s charts, stability, Routh
Hurwitz criteria. Nyquist stability criteria, compensators, design in frequency domain. Control system
components. Servo motors, synchros, tacho generator, error detector. State variable approach,
modeling, state transition matrix, transfer function, response.
ELECTRONICS:
Solid state devices and circuits. Small and large signal-amplifiers with and without feedback
at audio and radio frequency, multistage amplifiers. Operational amplifiers and applications.
Integrated circuits oscillators, RC, LC and crystal oscillators wave form generators, multi-vibrators –
Digital circuits, Logic gates, Boolean algebra combinational and sequential circuits. A to D and D to
A converters Micro processors (8085) instruction set, memories, interfacing programmable peripheral
devices – Number system flow charts – expressions and statements in C – language – simple
programs for engineering application.
D.C. ELECTRICAL MACHINES:
Fundamentals of electro mechanical energy conversion, constructional features of D.C.
Machines, emf equation types and characteristics of generators application, Torque in DC motor,
types of DC motors, applications. Testing of D.C. motors, efficiency, and starting and speed control.
TRANSFORMERS:
Construction – Principle of operation of 1-phase transformers – Vector diagram on No Load
and – Load – Parallel operation – Regulation – efficiency – Equivalent circuit 3 phase transformer
connections – Scott connection.
INDUCTION MOTORS:
Production of rotating magnetic field, production of torque types of motors equivalent circuits,
Circle diagram, torque slip characteristics, starting and maximum torque, speed control, principle of
single phase induction motors, Applications.
SYNCHRONOUS MACHINES:
Generation of emf in 3 phase AC Generator, Armature reaction, regulation by Synchronous
inpedance and Ampere turn methods, parallel operation, transient and sub-transiat reactances,
theory of salient pole machines.
Synchronous Motor: Torque production, performance characteristics, methods of starting, VCurves,
synchronous condenser.
Special Machines: Stepper motor, Methods of operation, Amplidyne and metadyneapplications.
5
ELECTRICAL POWER GENERATION:
General layout – Types of power stations, economics of different types, base load and peak
load stations, load factor and its effects, pumped storage schemes.
POWER TRANSMISSION:
Calculation of line parameters, concepts of short, medium and long transmission lines, ABCD
parameters, insulators, Corona, P.U. quantities, fault calculations, symmetrical components load flow
analysis using Gauss Seidal, New-ton Raphson, methods, economic operation, stability, steady state
and transient stability, equal area criterion, ALFC and AVR control for real time operation of
interconnected systems.
POWER SYSTEM PROTECTION:
Principles of arc quenching, circuit breaker classification, Recovery and restriking voltages,
relaying principles over current, directional over current relays-generator and transformer protection
using differential relays-line protection using distance relays Surgeo phenomena in transmission lines
– Travelling wave theory, protection against surges.
UTILISATION :
Industrial Drives – Motors for various drives – Braking methods – Speed control of motors –
Economics of rail traction – Mechanics of train movement – Estimation of power and energy
requirements – Illumination – Laws Factory lighting – Street lighting – Induction and dielectric
heating.

Read more »

APPSC ASO Job Notification 2011

8:22 PM

No comments

Hi Guys,

Here is the Good news for you all new year welcomes you with great opportunity...So grab Yours

APPSC already announced that it is going to fill 2,815 posts in various departments.

please find the list as below

హైదరాబాద్: ఏపీపీఎస్సీ 2,815 పోస్టుల భర్తీకి 10 నోటిఫికేషన్లు విడుదల చేసింది. అసిస్టెంట్ ఎగ్జిక్యూటివ్ ఇంజనీర్(1716), డిప్యూటీ సర్వేయర్లు(432), ఏఎస్‌ఓ( 394) ఇండస్ట్రీయల్ ప్రమోషన్ ఆఫీసర్స్(116), డ్రగ్ ఇన్స్‌పెక్టర్లు(56), ఎఫ్‌డీవో(35), చిల్డ్రన్ హోంసూపరింటెండెంట్స్(31), సీనియర్ ఎంటమాలజిస్ట్ (11), పోర్టు ఆఫీసర్లు(2) పోస్టులకు నోటిఫికేషన్లు వెలువరించింది.

అసిస్టెంట్ ఎగ్జిక్యూటివ్ ఇంజనీర్ పోస్టులకు జూలై 1న, డిప్యూటీ సర్వేయర్ల పోస్టులకు ఏప్రిల్ 22న, ఏఎస్‌ఓ పోస్టులకు జూన్ 24న రాత పరీక్ష జరగనుంది.

పోర్టు ఆఫీరర్ల పోస్టులకు ఫిబ్రవరి 26న, ఎఫ్‌డీవో పోస్టులకు మార్చి 4న, సీనియర్ ఎంటమాలజిస్ట్ పోస్టులకు మార్చి 25న, చిల్డ్రన్ హోంసూపరింటెండెంట్స్ పోస్టులకు ఏప్రిల్ 15న, డ్రగ్ ఇన్స్‌పెక్టర్లు పోస్టులకు ఏప్రిల్ 29న, ఇండస్ట్రీయల్ ప్రమోషన్ ఆఫీసర్స్ పోస్టులకు మే 6న పరీక్షలు నిర్వహించనుంది.